<source id="a9dnj"><td id="a9dnj"></td></source>
        1. <u id="a9dnj"><p id="a9dnj"><bdo id="a9dnj"></bdo></p></u>

        2. Lu'An Jietonda New Material Co.,Ltd.

          PRODUCTS

          Curing agents

          Product name Application Processing & Use level Characteristics
          K7101 Epoxy hardener/curing accelerator □ Incorporated into formula before extrusion
          □ As curing agent,e the use level is 2-4phr on epoxy resin
          ■ Excellent flow and low usage
          ■ Used as curing agent, curing @120℃/30min
          ■ Used as accelerator, curing @240℃/30s
          K7104 Epoxy hardener □ Incorporated into formula before extrusion
          □ As sole curative the use level is 3-5phr on epoxy resin
          ■ Curing @ 140℃/15min or 240℃/30s
          ■ Applied for thick film coatings or FBE coatings
          ■ Good mechanical properties
          ■ Good chemical resistance
          K7108 Epoxy hardener □ Incorporated into formula before extrusion
          □ As sole curative the use level is 4-6phr on epoxy resin
          ■ Curing @ 150℃/10min or 240℃/2min
          ■ Applied for thin film decorative coatings or functional epoxy powder coatings
          ■ Good film appearance and mechanical strength
          SA31 Epoxy hardener/curing accelerator □ Incorporated into formula before extrusion
          □ As accelerator, use level is 0.1-0.5% on total formula
          ■ For functional or decorative powder coatings
          ■ Curing @ 140℃/30min
          SA2830 Epoxy hardener □ Incorporated into formula before extrusion
          □ 3.5-4.5phr on epoxy resin
          ■ For functional or decorative powder coatings
          ■ Curing @ 180℃/15min
          SA2831 Epoxy hardener (accelerated DICY) □ Incorporated into formula before extrusion
          □ 4-5phr on epoxy resin
          ■ For functional or decorative powder coatings
          ■ Curing @ 160℃/12min or 200℃/5min
          SA3120 β-HAA hardener □ Incorporated into formula before extrusion
          □ Hydroxyl equivalent value is about 84
          ■ Eco-friendly,Low-toxicity,anti-yellowing
          ■ Exterior application, Substitute of TGIC
          K7150 Blocked polyisocyanate curing agent for PU powder coatings It is recommended to cure with hydroxyl polymer in equivalent amount (13:87 for polyester with hydroxyl value of 30; 20:80 for polyester with hydroxyl value of 50) ? Extremely high crosslink density , excellent surface hardness and chemical resistance for coating . ? Excellent leveling and smoothness. ? Excellent weather resistance.
          K7152 Blocked polyisocyanate curing agent for powder coatings It is recommended to cure with hydroxyl polymer in equivalent amount 13:87 for polyester with hydroxyl value of 30; 20:80 for polyester with hydroxyl value of 50 ? Extremely high crosslink density , excellent surface hardness and chemical resistance for coating . ? Excellent leveling and smoothness. ? Excellent weather resistance and anti yellowing performance.

          CONTACT US

          Contact us

          Order

          HOTLINE:

          +86-564-3711165
          +86-13966241417
           

          Mobile version

          Search

          Add: 15 Li Dun, North Outskirts of Luan City, Anhui, P, R, China  P.C.:237158
          Tel: +86-564-3711165 , +86-564-3711777
          Fax: +86-564-3711167 E-mail: jietonda@jietondachem.com

          Copyright(C)2019, Lu'An Jietonda New Material Co.,Ltd. All Rights Reserved. Supported by ChinaChemNet ChemNet Toocle Copyright Notice 備案序號:皖ICP備11004581號

          九七超碰,国产一级毛片高清视频完整版,国产高清无码在线,欧美日韩性爱网
              <source id="a9dnj"><td id="a9dnj"></td></source>
                1. <u id="a9dnj"><p id="a9dnj"><bdo id="a9dnj"></bdo></p></u>